I'd be interested in any
Submitted by Annec on Wed, 01/04/2012 - 14:23In reply to A newbie all over again! by Annec
If you go to the Navitron
Submitted by myabruzzohome on Wed, 01/04/2012 - 14:40In reply to A newbie all over again! by Annec
If you go to the Navitron (UK) website or even better phone them they will be able to advise you as they are very helpful and we there before all of the 'new' solar companies started up. I think covering the panels or draining the entire system (if water based) when you are away was some advice I had. http://www.myabruzzohome.blogspot.com
Solar overheating
Submitted by sagraiasolar on Fri, 01/06/2012 - 08:22In reply to A newbie all over again! by Annec
... have a look at your solar controller... if it is just a simple DeltaT switch then you can get overheating problems and you might have to upgrade it to something a bit more dedicated. The better ones have a'holiday' setting where the pump runs heat back out through the panels at night so each day starts with a cool tank. Balancing tank size with solar panels is obviously important. I'd happily comment if you give details.
Thanks everyone for your
Submitted by steve jackie on Fri, 01/06/2012 - 12:57In reply to Solar overheating by sagraiasolar
tank on the panel..
Submitted by sagraiasolar on Sat, 01/07/2012 - 07:02In reply to A newbie all over again! by Annec
ah... one of those. I'm just aiding the removal of one because as it heats fresh water there is a build up of lime scale which has clogged it up. In some ways they are like giant solar kettles. The replacement system will have some nice new panels with a pumped circuit to a coil in the new heat bank. I digress... so back to your tank... I don't suppose you want to get on the roof to cover it.... leaving it empty will definitely damage it because the panel itself is filled with 5 litres of antifreeze/solar fluid and this will boil almost as soon as the sun hits it. All I can think of at the moment is to fit a time-switch and solenoid valve to a hot tap for a daily timed heat dump.... 300 litres into the pool? You can convert it to a pumped circuit + (bigger) cylinder just by removing the tank on the panel, so that might be a longer term option.
Thanks for the info. I will
Submitted by steve jackie on Sat, 01/07/2012 - 09:35In reply to A newbie all over again! by Annec
I was interested by this
Submitted by bunterboy on Wed, 01/11/2012 - 06:55In reply to A newbie all over again! by Annec
I was interested by this product, not sure how it works or indeed the cost but looks pretty simple to install. Aviso please.. http://www.solcrafte.com/en/innovation
Solcraft comment...
Submitted by sagraiasolar on Wed, 01/11/2012 - 11:51In reply to I was interested by this by bunterboy
Bunterboy.... just did a reply when the forum site hung so here we go again. The web site is a bit furbo eg...'savings of up to 80%' er would that be 5% then? and 'hot water 365 days a year'.... not out here, must be talking about Arabia. This is just a slab tank in the sun so do we expect freezing and boiling problems? What we really need is big panels - 5mq + - loading a big tank, all with good control and a pressurised circuit with antifreeze. Efficiency is not relevant because the sun is free.. all we need to know is the cost per mq. of panel... invariably some simple flat panels are best.
I did a little more sniffing
Submitted by bunterboy on Wed, 01/11/2012 - 13:01In reply to A newbie all over again! by Annec
I did a little more sniffing around and found them on sale on ebay.it http://www.ebay.co.uk/itm/PANNELLO-SOLARE-SOLCRAFTE-200-/220852312776?pt... Hard to believe they would try to market a slab tank in a glass box as something cutting edge! I'd love to make it to one your seminars to get fully "genned up."
solar panels.....
Submitted by sagraiasolar on Thu, 01/12/2012 - 07:05In reply to I did a little more sniffing by bunterboy
I'm working in the UK , but
Submitted by bunterboy on Thu, 01/12/2012 - 07:30In reply to A newbie all over again! by Annec